Tubular Stamped Dowel Pins Bushings & Sleeves, Split Seam Spacers, Split Seam Bushings, Spring Pins, Wire & Tubing Connectors
Baker split seam spacers, dowel pins, bushings and inserts are sold in the United States and Canada to many industries. We encourage our customers to consider our product over costly cut-to-length tubing or screw machine parts. Split seam spacers will serve as well or better and save you money. Our slotted spring pins are chamfered and formed in our standard automated process. They can be produced from high carbon steel or stainless steel in a variety of finishes. Save by using split seam spacer products to connect pipe or tubing from either inside or outside. Specify I.D. or O.D., length, wall thickness, type of metal, finish, and special features such as open or closed seams, soft or spring temper.
» Dowel Pins Bushings & Sleeves
» Split Seam Spacers
» Split Seam Bushings
» Spring Pins
» Wire & Tubing Connectors
Dowel Pins Bushings & Sleeves
- Chamfered ends and interlocking seams are especially well-suited for installation in automated processes.
- Seams can be straight or V-shaped, open or closed, according to your specifications.
- Dowel bushings help locate bolts and protect brittle or softer material, such as rubber grommets in vibratory applications, from excess pressure when the nut is tightly torqued.
- Dowel bushings and sleeves add strength to the I.D. of plastic wheels and provide wear resistance.
- Dowel bushings assist in locating bolts and provide additional strength to the assembly.
- Hollow dowels accurately align components easing installation of bolts.
- Reusability
- O.D. .250" to .650"
- Length .500" to 2.00"
- Wall .028" to .058"
- Minimum Quantity 25,000
|
Click to Enlarge |
Back to Top
Split Seam Spacers
Reduce Overall Costs: Our split seam sleeves and bushings can save you 30% or more over the alternatives. Size Ranges
- Length .250" to 6.000"
- I.D. .125" to 1.770"
- O.D .190" to 2.250"
- Wall .024" to 0.187"
Tolerance Ranges
- Length ± .010" to .015"
- I.D. ± .005" to .010"
- O.D. ± .010" to .015"
Specification Sheet |
|
V-Shaped Seam
|
Straight Open Seam
|
Tight Seam at I.D.
|
|
Variation of V-Shaped Seam
|
O.D. Chamfered
|
I.D. Chamfered
|
|
Ends Serrated
|
Holes, Slots and End Cut-Outs
|
| |
Back to Top
Seam Bushings, Spacers and Sleeves
Many leading manufacturers of automotive, appliance, farm equipment, lawn and garden, injection molding and other industrial and consumer goods make use of split seam spacers, sleeves and bushings. Whatever your requirements, our wide range of standard dies will produce the split seam bushing, spacer or sleeve you need without the additional expense of costly tooling for most applications. Specification Sheet |
|
Back to Top
Custom Spring Pins
- Baker can produce many special size spring pins on existing tooling. The variation can be in the outside diameter, wall thickness, length--or in all three dimensions, whether inch or metric.
- Sizes range up to 1" O.D. x 5" long x .125 wall.
- Our slotted spring pins are chamfered and formed in our standard automated process. They can be produced from high carbon steel or stainless steel in a variety of finishes.
|
|
Back to Top
Wire and Tubing Connectors
- Wire and tubing connectors, or ferrules, save by using split seam tubes to give greater strength where wires are joined, such as in auto seat springs and display units.
- Save by using split seam tubes to connect pipe or tubing from either inside or outside. Specify I.D. or O.D., length, wall thickness, type of metal, finish, and special features such as open or closed seams, soft or spring temper.
|
|
Back to Top
|
